Corta
Price list
Effective October 2026. Prices in USD.
Panel cutting
Per sheet, up to 5 sheets Any sheet up to 4 x 10 ft, up to 8 parts. Nesting done by Corta. | $50.00 |
Per sheet, 6 to 15 sheets The rate of the order: every sheet of it. | $40.00 |
Per sheet, 16 sheets or more The rate of the order: every sheet of it. | $30.00 |
Each additional part Above 8 on the same sheet, per finished part. | $6.00 |
File preparation Only when the drawing needs fixing before the machine: scale, open outlines, stray layers. Told before we start. A file within the rules pays nothing. | $25.00 / page |
Edge banding
Standard PVC and in-stock colors Per linear foot, per edge. | $1.50 / ft |
Premium ABS Shinnoki, Decospan, Guararapes veneer lines. | $2.50 / ft |
Minimum per edge Applies to edges under 16 in (standard) or 10 in (premium). | $2.00 |
Colors not in stock Full roll billed with the order, plus $1.50 / ft labor. Remainder is yours. | roll + labor |
Tape supply All tape supplied by Corta. We do not run customer tape. |
Special parts and CNC
Doubled edges A 2 1/2 in strip from the same sheet, glued and doweled under the edge. Per strip; the strip counts as a part on the sheet. | $5.00 |
Full double A whole copy of the part glued underneath, all four edges doubled. Per layer. | $20.00 |
Tape on a doubled edge 1 1/2 in wide tape, per linear foot. | $3.00 / ft |
LED groove Cut by the CNC along the length. Per foot of groove. | $2.00 / ft |
Door: hinge cups 35 mm cup, 13 mm deep, placed by door height. Per cup. | $3.00 |
Programming from your drawing For shaped parts: curves and cut-outs. DWG, DXF or PDF, 1 hour minimum. A straight cut list is not programming: see file preparation above. | $95.00 / hr |
Machine time Routing shaped parts from a drawing. | $120.00 / hr |
Repeat jobs Programs on file run again at machine time only. | no setup |
Material supply
Melamine, MDF, plywood, veneer panels From our approved suppliers. Price per sheet on every quote after sign-in. | per sheet |
Florida sales tax 6.5% on material. Not charged with a resale certificate on file. | |
Special orders Material ordered for you is non returnable. |
Terms
- Corta is operated by Corta Panel, 2135 W Church St, Orlando, FL 32805.
- Minimum order $150 in services.
- Lead time: we cut within 2 business days after the panel arrives; next day panels ordered by noon are ready in 3 business days. Rush: ready 24 hours after the panel arrives, +30% on services.
- Full amount online when you order: card, Apple Pay, Google Pay or bank account (ACH).
- Panels come from our approved suppliers. Customer-supplied panels only by prior arrangement, processed as is.
- Tolerance plus or minus 1/32 in (0.8 mm). Replacements guaranteed only on material supplied by Corta.
- Pickup at 2135 W Church St, Orlando, or delivery: $250 flat within 50 miles, checked at checkout.
- Offcuts returned on request at pickup, otherwise discarded after 7 days.
- Prices may change without notice. Estimates valid for 15 days.